Track System For Holiday Lights
Holiday Light SlidersTM
Step 3. Pull Lights Around Track
-Either by hand or with a puller, advance light clips around the track. Note: Several commercial pole attachments are available and can be made into a puller using a pole such as a broom, mop, or paint hand or bulb changer with a threaded end. You can also easily make such a device.
-Light clips must be “hand walked” around any corner.-To complete installation, insert a Cam Lock at the beginning of the light string. Go to other end of string and pull string taut. Insert second Cam Lock to hold lights in place and keep them from shifting while they are hanging.
Step 2. Slide Clips on Track
-Load light clips by sliding clips into slot on track. Use Cam Locks on each end to lock lights in place.
-Off load clips from storage track to installed light track.
Step 1. Attach Clips to Lights
- Install light clips on light string wire (single or multiple wire) at approximately 1 foot intervals. It works best to put the clip midway between,rather than directly next to, bulbs, When using multiple strings of lights make sure the male and female plugs are tightly secured so that they can be pulled taut in final installation.
We Believe Holiday Light Decorating Should Be Easy and Fun, Not A Dreaded Chore
Copyright Holiday Light Sliders. All rights reserved.