We Believe Holiday Light Decorating Should Be Easy and Fun, Not A Dreaded Chore

Track System For Holiday Lights

Holiday Light SlidersTM

USE ON
ROOF LINES
EAVES
DOORS
WINDOWS
GARAGES
PATIOS
GAZEBOS

Holiday Light Sliders is a fast, easy, simple, attractive way of hanging exterior holiday lights and an even simpler method of removal and storage.

Holiday Light Sliders makes holiday light decorating easy. Hang exterior decorative lights in minutes along rooflines and eaves, around garages, doors and windows or on patios and gazebos.

Using Holiday Light Sliders track for holiday light installation is faster, safer and provides a far more attractive system than using staples, cuphooks, nails, screws, etc.

The product is a complete, ready to install kit that consists of track, track connectors, clips, cam locks (tighteners), an additional section of track for storage, and installation screws.

The track permanently mounts, is small and inconspicuous and can be easily painted to match existing d├ęcor. It can be attached to wood, metal, vinyl, stucco or masonry. Track connectors are provided to assist with alignment during installation.

The clips snap on the wires of the owner's current holiday light strings. The rounded top of the clip slides into the track and by sliding the clips along the track, the lights are pulled into place.

Insert the cam locks into the track and turn, locking the light strings tightly in place and holding them straight.

When the lights are removed, the clips are pulled in reverse and slipped onto the section of saved/uninstalled track so they can be stored tangle free and ready to go for next year. Lights can be conveniently stored by hanging in a garage or closet.

It can be used for multiple season holiday lights including Independence Day and Halloween or other special occasion lights.

Parts List

a) Light Track

b) Storage Track

c) Track Connector

d) Light Clip

e) Cam Lock

f) Screws

Track Kit Includes 

32 Feet of Track

One Storage Track (holds 32 feet of lights)

32 Light Clips

4 Cam Locks

8 Track Connectors

30 Screws

Installation Instructions

Track Dimensions 4' x 1/2" x 1/2"

Track made of PVC Plastic with UV light inhibitor

Warranty

When used and installed as directed the components of this product are warranted for one year against any defect in workmanship and will be replaced upon verification. Contact KMOR Innovations, Inc., P.O. Box 26446, Phoenix, AZ 85068-6446